Shaped steel single chain joints

Wei Xin Rubber

Product Categories

Friendly Links

home > Supply > Shaped steel single chain joints

Shaped steel single chain joints

Information Name:

Shaped steel single chain joints

Published:

2015-06-10

Validity:

Specifications:

Quantity:

1.00

Price Description:

Detailed Product Description：

Shaped steel single chain joints shaped steel expansion joints a single chain, shaped steel Q235C strength of not less than prescribed, nor less than the standard steel strength 240MPa, 2, shaped top surface flatness of steel requires three meters straightedge "1 mm 3, shaped steel side flatness claim 3 m straightedge "2 mm, 4, shaped steel should look smooth, surface without cracks, scarring, air bubbles, the burr should be removed, 5, rubber seal oil system or factory touch extrusion molding, cross section should be uniform, there should pores and other defects, 6, rubber material is neoprene or natural rubber, may not braced recycled rubber, and must comply with the in claim 7, the telescopic device is It means a combination of rubber seal with profiled steel anchor bars and locking plate made of, good luck to the site by using factory-assembled, 8, assembly forming a bridge expansion joints, shaped steel top surface elevation "1 mm, two seam width difference between "2 mm, 9, extending a long-seam desert if there is good transportation conditions, and in situ after installation before the formation of dangerous strength can be closed to traffic, then and demi road width as well, but often not, one telescopic device is too long, generally ten meters to the Lord, transportation is not convenient, easy deformation; two construction vehicles difficult to avoid in the past, so take 1/2 lane demi piecemeal installation as well, but the joint To fully welded internal department, after external polish, to meet the overall requirements of steel 10, steel, steel, shaped steel welding, weld thickness of 8 mm, weld to comply with regulatory requirements, 11, after assembly of the rubber strip should all enter notch, are not allowed outside of the drum, the 12, the assembled bridge expansion joints reserve size width, according to the drawing instructions to be set aside, the company operating the bridge bearings, bridge expansion joints, 80 joints, 160 bridge expansion joints and other articles of bridge bearings factory Hengshui Xin Wei Engineering Rubber Co., Ltd. Address: Hebei Hengshui City Rubber City District 8 on the 21st landline: 0318-8889500 Mobile: 18330869500 ??E-mail: 18330869500@163.com Website: www.xwxjgs. com

Admin>>>
You are the 4329 visitor
Copyright © GuangDong ICP No. 10089450, Wei Xin Rubber All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility